Product Details
Platform Chairs
Design Parameters:
No
|
Item
|
Design Parameters
|
1
|
Bottom wheels load
|
≥350Kg/set
|
2
|
Structure static load
|
Longitudinal≥450kg/㎡，
|
Lateral≥200kg/㎡
|
3
|
Steps static load
|
≥400kg/㎡
|
4
|
Step depth
|
900mm
|
5
|
Step height
|
300mm
Bottom step 350mm
|
6
|
Passageway width
|
1000mm
|
Material Specification:
Type
|
Name
|
Specification
|
Tech Brief
|
Usage
|
Seating
|
JY-8701
|
Height 18cm, depth 42cm, center-lines 48cm
|
Hollow blow molding, front display
|
Seating
|
Platform
|
C steel
|
180×60×30×2.5 mm (folding formation)
|
QB standard、 lacquer enamel
|
Main Beam
|
Platform
|
Rectangular pipe
|
100×50×2.5 mm
|
QB standard, painted
|
Main supporter
|
Platform
|
Rectangular pipe
|
50×40×2.0㎜
|
QB standard Anti-rust dealt
|
Beams of main supporter
|
Platform
|
Square pipe
|
40×40×2.0㎜
|
QB standard
Anti-rust dealt
|
Beams of main supporter
|
Operation Instructions
1. Before using the stand, be sure to check whether there are people in front of the stands; If there is, it is required to ask people away from the stands to avoid accidents.
2. Before using the stand, be sure to check whether there is any obstacles on the ground in front of the stands. If there is, it must be cleaned to ensure that the smooth flow of the ground in front of the stands.
3. After the confirmation of the stand in front of the ground without people and the ground without obstacles, use the matching remote control for the stand provided by us, press button "B", the stand will be extended in sequence.
4. When the stands finish extending, press button "C" to make the stands fixed.
5 Put the movable steps in the middle of aisle of each row orderly to help people to get through the aisle.
6.Stand up the seats by row and check whether the seat is in place and fastened properly.
7. In the course of using the stands, no person shall be frolicking, falling or climbing in the stands to avoid accidents.
8 Before the stand is closed after using, be sure to check whether there are people remained on the stand; if there is, then call away immediately.
9. Press down the turnover mechanism under the seat，then keep the seat flat on the stand by row.
10. Press button "A" in the remote control, the stand will be closed in sequence.
11. When the stand finish closing, press button "C" to make the stands fixed.
Email or call for free display drawing and sample!
http://www.geseating.com/
Company Profile
